That's HomeGuide's range to refinish hardwood floors: $2 – $7 per sq ft to sand and refinish, or $3 – $8 if you're changing the color with stain.[1] A 400 sq ft living area runs about $800 – $3,200.[1] Our planning budget for 600 sq ft of stained floor plus a 13-step staircase comes to about $5,275.
Ranges quoted from HomeGuide[1]; the per-area figures and the planning budget are our own math on those figures. Think of them as planning numbers, not quotes. The method, stain, stairs and repairs move the price most.
Cost by refinishing method
A full sand-and-refinish takes the floor back to bare wood. A screen and recoat just scuffs the top finish and adds a fresh coat, which is enough if the wear hasn't reached the wood.
| Method | Cost per sq ft |
|---|---|
| Screen, buff and recoat | $2 – $5 |
| Sandless (chemical) refinishing | $2 – $6 |
| Sand and refinish | $2 – $7 |
| Sand, stain and refinish | $3 – $8 |
| Whitewashing | $3 – $8 |
HomeGuide.[1] Some refinishers have a minimum charge, so doing several rooms in one visit is usually cheaper per foot.[1]
Cost by area
Here's HomeGuide's per-foot pricing applied to a few common areas: $2 – $7 per sq ft without stain and $3 – $8 with it.[1]
| Area | Cost |
|---|---|
| 144 sq ft (12 × 12 bedroom) | $290 – $1,010 with stain $430 – $1,150 |
| 400 sq ft (living and dining) | $800 – $2,800 with stain $1,200 – $3,200 |
| 1,000 sq ft (most of a floor) | $2,000 – $7,000 with stain $3,000 – $8,000 |
| 1,500 sq ft (whole house) | $3,000 – $10,500 with stain $4,500 – $12,000 |
Our math on HomeGuide's per-square-foot ranges, rounded to the nearest $10.[1] Closets and hallways count; measure every room you want done.
Cost by wood type
| Floor | Cost per sq ft |
|---|---|
| Oak, cherry or pine | $3 – $7 |
| Maple or mahogany | $4 – $8 |
| Parquet | $3 – $6 |
| Engineered hardwood | $2 – $6 |
| Bamboo | $2 – $6 |
HomeGuide.[1] Engineered floors can only be sanded if the top wood layer is thick enough, at least 2 mm, and usually only 1 to 3 times.[1]
Extras that show up on bids
See the full table
| Item | Cost |
|---|---|
| Stairs | $25 – $85 per step |
| Extra coat of finish | $0.50 – $1.75 per sq ft |
| Dustless sanding | $2 – $4 per sq ft extra |
| Wire-brushed texture | $2 – $5 per sq ft |
| Board repairs | $500 – $1,500 |
| Carpet removal | $0.25 – $1.00 per sq ft |
| Moving furniture | $20 – $50 per room |
HomeGuide.[1] HomeGuide also prices repairs at $2 – $20 per sq ft.[1] These are where bids differ most. When you compare quotes, check which ones include stairs, a third coat and furniture moving; our bid comparison guide walks through it.
A sample budget: main floor and stairs
Here's how we'd build a planning budget for a common job: 600 sq ft of oak on the main floor, sanded and stained a new color, with an extra coat of finish, a 13-step staircase and furniture moved out of three rooms.
See the full table
| Line item | How we priced it | Amount |
|---|---|---|
| Sand, stain and refinish | 600 sq ft × $5.50 (midpoint of $3 – $8) | $3,300 |
| Extra coat of finish | 600 sq ft × $1.125 (midpoint of $0.50 – $1.75) | $675 |
| Stairs | 13 steps × $55 (midpoint of $25 – $85) | $715 |
| Moving furniture | 3 rooms × $35 (midpoint of $20 – $50) | $105 |
| Contingency, 10% | Our rule of thumb for boards that need patching | $480 |
| Planning total | Before regional adjustment | $5,275 |
Our math, using HomeGuide's figures.[1] If the floor only looks dull, a screen and recoat ($2 – $5 per sq ft) could cut the first line to roughly $1,200 – $3,000.[1] Method: How we build our ranges.
Refinish or replace?
Refinishing makes sense for scratches, dull spots and light stains. HomeGuide says replacement is the better call for widespread water damage, warping, or wood too thin to sand again, and puts new hardwood at $11 – $25+ per sq ft installed.[1] By that math, replacing the 600 sq ft above would run about $6,600 – $15,000, so refinishing usually wins when it's an option. Solid hardwood can typically be refinished 4 to 10 times.[1]
Weighing other floors too? Our flooring cost guide compares LVP, tile, hardwood and carpet. If you're painting at the same time, do the walls first; see our interior painting guide.
Costs in your city
Want numbers for your area? Our local cost pages adjust these national ranges for 50 metro areas using local construction wages, including Philadelphia, Nashville and Portland. See all 50 cities →
Hardwood floor refinishing FAQ
How much does it cost to refinish hardwood floors?
HomeGuide puts it at $2 – $7 per sq ft without stain and $3 – $8 with stain, or $800 – $3,200 for 400 sq ft.[1]
How much does it cost to refinish hardwood stairs?
HomeGuide says $25 – $85 per step.[1] By our math, a 13-step staircase runs about $325 – $1,105.
Is it cheaper to refinish or replace hardwood floors?
Refinishing, by a wide margin when the wood is sound: $2 – $8 per sq ft to refinish versus $11 – $25+ per sq ft for new hardwood installed, by HomeGuide's figures.[1]
How long does it take to refinish hardwood floors?
HomeGuide says 2 to 6 days, depending on the area, number of coats and drying time between steps.[1]
How often should hardwood floors be refinished?
HomeGuide suggests every 7 to 10 years, or when scratches, dullness or worn spots won't clean up.[1]
Get the free Remodel Budget Starter, plus new cost guides once a month
It's a one-page budget spreadsheet for any project, with room for your scope, line items, contingency and total.
Related cost guides
Sources
- HomeGuide, “How much does it cost to refinish hardwood floors?” (Jul 14, 2025). homeguide.com/costs/cost-to-refinish-hardwood-floors (accessed Nov 17, 2026).
Figures with a citation number are quoted straight from the sources above. Everything else is our own math on top of them, and How we build our ranges shows how we did it. These are numbers to plan with, not quotes, so get itemized bids from local contractors before you commit.