Kitchen backsplash cost guide

Kitchen Backsplash Cost

Quick answer Estimate
$15 – $28 per sq ft

That's the range we'd plan around to install a ceramic or subway tile backsplash, with a typical cost of about $21 per sq ft. For a typical 30 sq ft backsplash that's roughly $450 – $850, typically about $650. Glass or natural stone tile typically runs about $28 per sq ft ($850 for 30 sq ft), and removing old tile adds about $4 per sq ft.

This range blends two published sources[1][2]. Good for planning, but not a quote. The tile, the size and the number of outlets move the price most.

Kitchen backsplash cost by type

A backsplash is one of the smallest kitchen projects, which is why it is priced per square foot. Prices below are installed: tile, adhesive, grout and the labor to set it, on a wall that is ready for tile. Removing old tile and electrical work are listed separately under extra costs.

Ledger and Lumber kitchen backsplash ranges by type
TypePer sq ft, installed 30 sq ft backsplash Typical, 30 sq ft
Ceramic or subway tile
Glazed ceramic or porcelain, including 3x6 subway tile. The most common choice.
$15 – $28$450 – $850$650
Glass or natural stone tile
Glass mosaic, marble, travertine or slate. More cutting and, for stone, sealing.
$15 – $40$450 – $1,200$850
How we got these numbers[1][2]

We took the low, middle and high price each source gives for a similar job and lined them all up. The price in the middle is our typical. The middle half of the list sets our low and high, so one unusually cheap or pricey figure doesn't throw it off. The ceramic row combines HomeGuide's installed ceramic and subway tile ranges with Angi's overall installed range per sq ft. The glass and stone row combines HomeGuide's installed glass and marble ranges with Angi's overall range. The 30 sq ft column is the per-foot price times 30, rounded to the nearest $50. Our method is in How we build our ranges.

What the sources say

HomeGuide puts backsplash installation at $10 to $50 per sq ft, or $500 to $1,700 on average, with a national average of $1,100 for 20 to 40 sq ft.[1] Angi's 2026 figures are $480 to $1,500, an average of $1,000 for about 35 sq ft, or $15 to $40 per sq ft.[2] HomeGuide puts a full-height slab backsplash in quartz, granite or marble at $35 to $200 per sq ft.[1]

Installed cost by backsplash size

Angi installed backsplash cost by size
Backsplash sizeAngi, installed Angi average
15 sq ft$225 – $600$420
20 sq ft$280 – $800$560
25 sq ft$350 – $1,000$700
30 sq ft$450 – $1,200$840
40 sq ft$600 – $1,600$1,120
50 sq ft$750 – $2,000$1,400

Angi's installed cost by backsplash size.[2] Our ceramic typical of $650 for 30 sq ft sits inside Angi's $450 – $1,200.

Extra costs

Kitchen backsplash extra costs
ExtraOur range Typical
Remove the old backsplash
Per sq ft. HomeGuide: $2–$5. Angi: $3–$6. Includes patching the drywall behind it.[1][2]
$3 – $5/sq ft$4/sq ft
Outlet and switch work
Box extenders or moving an outlet so covers sit flush on the tile. HomeGuide puts electricians at $50–$130/hr;[1] we allow about two hours.
$100 – $260$180

We blended removal the same way as the tile prices. For the outlet line, we allowed two hours at HomeGuide's hourly rates. HomeGuide puts thinset or mastic and grout at $1 to $2 per sq ft, already inside the installed prices above.[1]

Line-item breakdown: 30 sq ft subway tile backsplash

Here's how we'd build the budget for a common job: 30 sq ft of ceramic subway tile on painted drywall, with no old tile to remove. It's the checklist we'd hold every bid against.

See the full table
Line-item estimate for a 30 sq ft ceramic subway tile backsplash
Line itemHow we priced itAmount
Subway tile, 35 sq ft (30 sq ft plus 15% for cuts)
Materials
Our allowance at $5 per sq ft for mid-range ceramic subway tile$175
Thinset or mastic, grout and sealer
Materials
HomeGuide's $1–$2 per sq ft for setting materials,[1] at the midpoint, for 30 sq ft$45
Edge trim and caulk
Materials
Our allowance for metal or bullnose edge trim where the tile ends$60
Outlet box extenders
Materials
Our allowance for three or four extenders$30
Prep, set, cut, grout and clean the tile
Labor
8 hrs × $26.77/hr median wage for tile and stone setters[4] × 1.7 labor burden. HomeGuide puts the job at two to four days including cure time[1]$360
Overhead & profit
Our assumption
20% on the labor and materials lines above.$130
Line-item totalBefore contingency and regional adjustment$800
How the line items compare

Add up the line items and you get $800. That's about 23% above the $650 typical in our range for 30 sq ft. Even a small tile job takes about a day of labor, which is why Angi's 30 sq ft average of $840 also sits above a straight per-sq-ft figure.[2] More on how we build our ranges.

What makes it cost more or less

The tile

HomeGuide puts ceramic tile at $6 to $28 per sq ft installed and glass or marble at $10 to $45.[1] Small mosaics and handmade tile take longer to set than 3x6 subway tile.

Size and layout

Fewer square feet doesn't always mean a lower bill: outlets, windows and cabinet ends all add cuts. Herringbone and other patterns take longer than a straight running bond.

Outlets and switches

Most backsplashes have several outlets. Box extenders are cheap; moving an outlet needs an electrician, at $50 to $130 an hour by HomeGuide's figures.[1]

What's on the wall now

Painted drywall can usually be tiled directly. Old tile has to come off, at $2 to $6 per sq ft by HomeGuide's and Angi's figures, and damaged drywall has to be patched.[1][2]

A slab instead of tile

A full-height slab matched to a stone or quartz countertop is a different job: HomeGuide puts it at $35 to $200 per sq ft.[1] See our countertop cost guide.

Contingency

Hold 10% if you're removing old tile. That's our rule of thumb, because the wall behind old tile is often damaged and needs new drywall.

How the cost changes by region

Backsplash tile is interior trade work, so we apply our interior cost index to our typical 30 sq ft ceramic backsplash.

See the full table
Our interior cost index and typical 30 sq ft ceramic backsplash, installed by division
Region (Census division)Our cost index Typical 30 sq ft ceramic backsplash, installed
New England
CT, ME, MA, NH, RI, VT
1.04
4% above U.S.
$700
Middle Atlantic
NJ, NY, PA
1.13
13% above U.S.
$750
South Atlantic
DE, DC, FL, GA, MD, NC, SC, VA, WV
0.98
2% below U.S.
$650
U.S. average1.00$650
East North Central
IL, IN, MI, OH, WI
0.96
4% below U.S.
$600
East South Central
AL, KY, MS, TN
0.90
10% below U.S.
$600
West North Central
IA, KS, MN, MO, NE, ND, SD
1.02
2% above U.S.
$650
West South Central
AR, LA, OK, TX
0.89
11% below U.S.
$600
Mountain
AZ, CO, ID, MT, NV, NM, UT, WY
0.96
4% below U.S.
$600
Pacific
AK, CA, HI, OR, WA
1.07
7% above U.S.
$700
How we adjust for each region

We worked these out ourselves; they aren't published figures. For each region, we look at how far its 2025 Cost vs. Value prices for four interior projects (three bathroom remodels and a basement remodel) sit above or below the national average, then average the four results.[3] The typical column applies that to our national typical. Our method is in How we build our ranges.

Costs in your city

Want numbers for your area? Our local cost pages adjust these national ranges for 50 metro areas using local construction wages, including Charlotte, Los Angeles and Riverside. See all 50 cities →

Kitchen backsplash cost FAQ

How much does a kitchen backsplash cost?

About $15 – $28 per sq ft installed for ceramic or subway tile by our estimate, typically $21. For a typical 30 sq ft backsplash that's about $450 – $850, typically $650. Angi's 2026 national average is $1,000 for about 35 sq ft.[2]

How many square feet is a kitchen backsplash?

Most run 20 to 40 sq ft. HomeGuide's national average of $1,100 is for 20 to 40 sq ft of tile.[1] Measure each wall section between the counter and the upper cabinets (width × height in inches, divided by 144) and add 10% to 15% for cuts.

How much is labor to install a backsplash?

HomeGuide and Angi both put tile labor at $5 to $20 per sq ft, and Angi at $50 to $100 an hour.[1][2] Small jobs often carry a minimum charge, so a 20 sq ft backsplash can cost more per sq ft than a 40 sq ft one.

How long does it take to install a backsplash?

HomeGuide puts it at two to four days, mostly waiting for the adhesive and grout to cure between steps.[1] The hands-on tile work for an average kitchen is usually one day.

Is glass or stone backsplash tile worth the extra cost?

It costs more, about $28 per sq ft installed versus $21 for ceramic or subway tile by our estimate, and natural stone needs sealing. On a 30 sq ft backsplash the difference is roughly $200, small next to a full kitchen remodel.

Sources

  1. HomeGuide, backsplash installation cost guide (updated Oct 5, 2023). homeguide.com/costs/backsplash-installation-cost (accessed Nov 4, 2026).
  2. Angi, kitchen backsplash cost guide [2026 data]. angi.com/articles/how-much-does-kitchen-backsplash-cost.htm (accessed Nov 4, 2026).
  3. Zonda / Journal of Light Construction, 2025 Cost vs. Value Report: national averages and regional pages (New England, Middle Atlantic, South Atlantic, East North Central, East South Central, West North Central, West South Central, Mountain, Pacific) (accessed Oct 8, 2026). © 2025 Zonda Media. We quote a few national figures and use the regional figures only to derive our own cost index. States per division from the U.S. Census Bureau, Census Regions and Divisions.
  4. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May 2025 national median hourly wages by occupation, retrieved through the BLS Public Data API. bls.gov/oes (accessed Oct 8, 2026).

Figures with a citation number are quoted straight from the sources above. Everything else is our own math on top of them, and How we build our ranges shows how we did it. These are numbers to plan with, not quotes, so get itemized bids from local contractors before you commit.