Repipe cost guide

Whole-House Repipe Cost: PEX vs. Copper

Quick answer Estimate
$3,000 – $5,500

That's the range we'd plan around to repipe a typical 2,000 sq ft home with PEX, the usual choice for a repipe, with a typical cost of about $4,300 before wall repair and the permit. The same house in copper runs about $8,000 – $16,000. Angi's national average across all homes and materials is about $7,500.[1][2]

This range blends two published sources[1][2]. Use this to plan; your bids will set the real price. Fixture count and how many finished walls must be opened move the price most.

Repipe cost by pipe material

Pipe is the cheap part of a repipe. Angi puts labor at about 70% of the bill, because the work is opening walls, running new lines to every fixture and closing everything back up.[2] The material still sets the range: copper costs several times what PEX does, per foot and per house.

Repipe cost by pipe material
MaterialPipe, per linear ft 2,000 sq ft home, installed
PEX
Flexible plastic tubing. Snakes through walls with fewer openings; resists freezing; can't be used outdoors in sunlight.
$0.40 – $2[2]$2,000 – $4,000 [1]
our range $3,000 – $5,500
CPVC
Rigid plastic with glued joints. Between PEX and copper on price.
$0.50 – $1[2]not published
Copper
Long-lasting and bacteria-resistant, but costs more for material and labor.
$2 – $8[2]$8,000 – $16,000 [1]
How we got these numbers

How we got our PEX range. HomeGuide gives $2,000 – $4,000 for a 2,000 sq ft PEX repipe and $3,100 – $5,500 as the average to repipe an existing home that size.[1] We use the higher, existing-home figure as the top of our range and $3,000 as the bottom, because almost every repipe is in an occupied, finished house. Typical is the midpoint, rounded.

Repipe cost by home size

Square footage is only a stand-in for how much pipe a house needs. A small house with three bathrooms can cost more than a large one with one. We scaled our PEX range (about $1.50 – $2.75 per sq ft) and HomeGuide's copper totals ($4 – $8 per sq ft) by size.[1]

Repipe cost by home size
Home sizePEX Copper
1,000 sq ft (1 bath)$1,500 – $2,750$4,000 – $8,000
1,500 sq ft$2,250 – $4,150$6,000 – $12,000
2,000 sq ft (2–3 baths)$3,000 – $5,500$8,000 – $16,000
2,500 sq ft$3,750 – $6,900$10,000 – $20,000
3,000 sq ft$4,500 – $8,250$12,000 – $24,000

HomeGuide prices replumbing a 1,500 sq ft home at $2,280 – $4,080 on average, which falls inside our 1,500 sq ft PEX row.[1]

Extra costs to check for in your quote

These are the lines most often left out of a repipe quote. Ask each plumber whether they're included.

Repipe add-on costs
ItemCost
Drywall patching and paint after the new lines are in$300 – $1,500+[1]
Removing old pipe, if billed separately$1,000 – $5,000[1]
Permit$50 – $500[2]
Single fixture repiped instead of the whole houseabout $1,200 each[2]
Galvanized, lead or polybutylene pipe replacement$2,000 – $15,000[1]

What drives the price

  • Pipe material. The biggest single choice. Copper runs several times PEX.[1][2]
  • Bathrooms and fixtures. Every sink, toilet, shower, appliance and hose bib needs its own line.
  • Stories and access. Pipes in an open basement or crawl space are cheap to reach. Pipes inside finished walls and ceilings mean more openings and more patching.
  • Old pipe. Galvanized, polybutylene and lead lines are the usual reasons for a repipe; most homes over 50 years old eventually need one, per HomeGuide.[1]
  • Where you live. Plumber wages vary by region; see our local cost pages.

How to compare repipe bids

Repipe quotes swing widely because plumbers include different things. Put each bid on the same rows: pipe material and brand, number of fixtures, whether the water heater connections and main shutoff are included, wall openings and who patches them, permit and inspection, old-pipe removal, and the warranty. A bid that is far below the others usually leaves out drywall repair or the permit. Our free before-you-sign checklist lists these checks, and the $5 Bid Comparison Sheet lines up to three bids side by side.

Costs in your city

Prices shift a lot from city to city. Our local cost pages adjust these national ranges for 50 metro areas using local construction wages, including Denver, New York and Seattle. See all 50 cities →

Whole-house repipe FAQ

How much does it cost to repipe a 2,000 sq ft house?

By our range, about $3,000 – $5,500 with PEX (typical about $4,300) and $8,000 – $16,000 with copper, before drywall repair and the permit. HomeGuide publishes $2,000 – $4,000 for PEX and $8,000 – $16,000 for copper in a 2,000 sq ft home.[1]

Is PEX or copper cheaper for a repipe?

PEX, by a wide margin. Angi puts PEX pipe at $0.40 – $2 per linear foot and copper at $2 – $8.[2] For a whole house that means roughly a third to half the cost.

What is the average cost to repipe a house?

Angi's national average is about $7,500, with most homeowners paying $1,500 – $15,000 depending on size, material and how much of the house is repiped.[2]

Does a repipe include drywall repair?

Often not. HomeGuide puts drywall repair at $300 – $1,500 or more.[1] Ask every plumber whether patching and paint are in the price.

How long does a whole-house repipe take?

Angi says a small home takes a few days and a large multistory home can take several weeks.[2] Most crews keep water running at night during the job.

Sources

  1. HomeGuide, “How much does it cost to install or replace plumbing?” (2026). homeguide.com/costs/install-new-house-plumbing-pipes-cost (accessed Nov 7, 2026).
  2. Angi, “How Much Does It Cost to Repipe a House? [2026 Data]”. angi.com/articles/cost-to-repipe-a-house.htm (accessed Nov 7, 2026).

Figures with a citation number are quoted straight from the sources above. Everything else is our own math on top of them, and How we build our ranges shows how we did it. These are numbers to plan with, not quotes, so get itemized bids from local contractors before you commit.