Egress window cost guide

Egress Window Cost

Quick answer Estimate
$4,200 โ€“ $7,000

That's our range to add a standard basement egress window with its well, installed, with a typical cost of about $5,950 for the window, well, digging, foundation cut and labor. A large 36x60-inch window runs about $5,000 โ€“ $8,500. Drainage typically adds about $1,650, and a permit about $400.

This range blends two published sources[1][2]. Good for planning, but not a quote. The foundation, the well, drainage and access move the price most.

Egress window cost by size

An egress window is a foundation job as much as a window job: the crew digs a well outside, cuts a larger opening in the concrete or block wall, sets the window and installs the well, then finishes the inside. Prices below are installed, including the window, a basic metal well and the labor. Drainage, permits and interior finishing are listed under extra costs.

Ledger and Lumber egress window ranges by size
TypeInstalled Typical
Standard egress window
About 24x36 to 30x48 inches, with a metal or plastic well, cut into a poured concrete or block foundation.
$4,200 โ€“ $7,000$5,950
Large egress window
About 36x60 inches. Angi's figure, used as-is.
$5,000 โ€“ $8,500$6,750
Where these numbers come from[1][2]

For a standard egress window, we lined up the low, middle and high prices from four ranges: Angi's overall installed range, Angi's 30x48-inch range, HomeGuide's typical range and HomeGuide's full low-to-high range. The middle price is our typical, and the middle half of those prices sets our low and high. Only Angi prices large windows, so that row is simply Angi's range, with its midpoint as our typical. More on how we build our ranges.

What the sources say

Angi's 2026 figures put an egress window at $2,723 to $5,881, an average of $4,236 across 760 projects.[2] HomeGuide puts it at $6,000 to $8,000 on average, $7,000 typical, from $4,000 to $12,000.[1] The difference is mostly scope: HomeGuide's figures assume more digging, drainage and finishing.

Installed cost by window size

Angi installed egress window cost by size
Window sizeAngi, installed
24x36 in.$2,500 โ€“ $4,000
30x48 in.$3,500 โ€“ $6,000
36x60 in.$5,000 โ€“ $8,500
Custom$6,000 and up

Angi's installed cost by egress window size.[2] Angi puts a metal well at $200 to $600, a plastic well at $250 to $800 and a concrete or stone well at $750 to $2,500.[2]

Extra costs

Egress window extra costs
ExtraOur range Typical
Drainage
A drain at the bottom of the well tied to the footing drain or a sump. HomeGuide: $1,000โ€“$4,000. Angi: $500โ€“$2,000.[1][2]
$1,050 โ€“ $2,400$1,650
Permit and inspection
HomeGuide: $200โ€“$500+. Angi: $100โ€“$500 for the permit plus $50โ€“$300 for inspections.[1][2]
$250 โ€“ $500$400
Interior finishing
Drywall returns, trim and paint around the new opening. Angi: $300โ€“$1,200, used as-is.[2]
$300 โ€“ $1,200$750

We blended drainage and permits the same way as the standard window. Angi also lists a well cover at $50 to $500, security bars at $50 to $300, site prep at $500 to $2,000 and cleanup at $100 to $500.[2]

Line-item breakdown: one 30x48-inch egress window

Here's how we'd build the budget for a common job: one 30x48-inch egress window cut into a poured concrete basement wall, with a metal well, a cover and a gravel base, finished inside. It's the checklist we'd hold every bid against.

See the full table
Line-item estimate for one 30x48-inch egress window
Line itemHow we priced itAmount
Egress-size vinyl window
Materials
Our allowance for a vinyl slider or casement that meets the egress opening$700
Metal window well with built-in steps
Materials
Midpoint of Angi's $200โ€“$600 metal well[2]$400
Well cover
Materials
Midpoint of Angi's $50โ€“$500[2]$275
Gravel base and drain fittings
Materials
Our allowance$150
Cut the foundation, set and seal the window, install the well
Labor
20 hrs ร— $29.12/hr median wage for carpenters[4] ร— 1.7 labor burden. Angi puts labor at 16 to 24 hours[2]$990
Helper: digging, backfill and haul-out
Labor
8 hrs ร— $22.66/hr median wage for construction laborers[4] ร— 1.7 labor burden$310
Overhead & profit
Our assumption
20% on the labor and materials lines above. Installed prices and fees below already include the installer's margin, so we don't mark them up again.$570
Excavation and site prep
Installed price
Midpoint of Angi's $500โ€“$2,000[2]$1,250
Interior drywall, trim and paint
Installed price
Midpoint of Angi's $300โ€“$1,200[2]$750
Permit and inspection
Fee
Our blended typical from HomeGuide's and Angi's figures[1][2]$400
Cleanup
Installed price
Midpoint of Angi's $100โ€“$500[2]$300
Line-item totalBefore contingency and regional adjustment$6,095

The line items above total $6,095, about 2% over our typical of $5,950 for a standard egress window. So the two line up. Our method is in How we build our ranges.

What makes it cost more or less

Window size

Angi puts a 24x36-inch egress window at $2,500 to $4,000 installed and a 36x60-inch one at $5,000 to $8,500.[2] The opening has to meet code, so smaller isn't always an option.

The foundation wall

Cutting poured concrete takes a large saw and careful shoring; block walls need the cut cores filled and a new header. An existing window opening that just needs enlarging is the cheapest case.

The well

A basic metal well is the cheapest. Angi puts concrete or stone wells at $750 to $2,500,[2] and a well deeper than 44 inches needs a ladder or steps by code.[1]

Drainage

A well without a drain fills with water. Tying into the footing drain or a sump can add $500 to $4,000 by Angi's and HomeGuide's figures.[1][2]

Access and digging

Landscaping, a deck, a patio or buried utilities next to the wall slow the dig. Hand digging in tight spots costs more than a mini excavator.

Contingency

Hold 15% for an egress window. That's our rule of thumb, because old foundations, buried lines and drainage surprises are common.

Regional cost differences

Egress windows are mostly foundation and interior trade work, so we apply our interior cost index to our typical standard egress window.

See the full table
Our interior cost index and typical standard egress window, installed by division
Region (Census division)Our cost index Typical standard egress window, installed
New England
CT, ME, MA, NH, RI, VT
1.04
4% above U.S.
$6,200
Middle Atlantic
NJ, NY, PA
1.13
13% above U.S.
$6,700
South Atlantic
DE, DC, FL, GA, MD, NC, SC, VA, WV
0.98
2% below U.S.
$5,850
U.S. average1.00$5,950
East North Central
IL, IN, MI, OH, WI
0.96
4% below U.S.
$5,700
East South Central
AL, KY, MS, TN
0.90
10% below U.S.
$5,350
West North Central
IA, KS, MN, MO, NE, ND, SD
1.02
2% above U.S.
$6,050
West South Central
AR, LA, OK, TX
0.89
11% below U.S.
$5,300
Mountain
AZ, CO, ID, MT, NV, NM, UT, WY
0.96
4% below U.S.
$5,700
Pacific
AK, CA, HI, OR, WA
1.07
7% above U.S.
$6,350
How we adjust for each region

We worked these out ourselves; they aren't published figures. For each region, we look at how far its 2025 Cost vs. Value prices for four interior projects (three bathroom remodels and a basement remodel) sit above or below the national average, then average the four results.[3] The typical column applies that to our national typical. More on how we build our ranges.

Costs in your city

Where you live changes the price, mostly because of labor. Our local cost pages adjust these national ranges for 50 metro areas using local construction wages, including Dallas, Nashville and San Francisco. See all 50 cities โ†’

Egress window cost FAQ

How much does an egress window cost?

About $4,200 โ€“ $7,000 installed for a standard basement egress window with its well, by our estimate, typically about $5,950. Angi's 2026 national average is $4,236 and HomeGuide's is $7,000.[1][2]

What size does an egress window have to be?

HomeGuide summarizes the International Residential Code minimums: a 5.7 sq ft clear opening, at least 20 inches wide and 24 inches high, with the sill no more than 44 inches above the floor. The well must be at least 9 sq ft, and a well deeper than 44 inches needs a ladder or steps.[1] Your local code may differ, so check with the permit office.

Do I need a permit for an egress window?

Almost always, because the job cuts into the foundation and creates a code-required escape opening. Angi puts permits at $100 to $500 plus $50 to $300 for inspections, and HomeGuide at $200 to $500 or more.[1][2]

How long does it take to install an egress window?

HomeGuide puts it at two to three days,[1] and Angi puts labor at 16 to 24 hours.[2] Digging the well, cutting the concrete and waiting for an inspection set the schedule.

Do I need an egress window to finish my basement?

If the finished basement will have a bedroom, building codes generally require an emergency escape opening in it. See our basement finishing cost guide for the rest of the budget.

Sources

  1. HomeGuide, egress window installation cost guide (updated Oct 22, 2025). homeguide.com/costs/egress-window-installation-cost (accessed Nov 4, 2026).
  2. Angi, egress window cost guide [2026 data]. angi.com/articles/how-much-does-egress-window-cost.htm (accessed Nov 4, 2026).
  3. Zonda / Journal of Light Construction, 2025 Cost vs. Value Report: national averages and regional pages (New England, Middle Atlantic, South Atlantic, East North Central, East South Central, West North Central, West South Central, Mountain, Pacific) (accessed Oct 8, 2026). ยฉ 2025 Zonda Media. We quote a few national figures and use the regional figures only to derive our own cost index. States per division from the U.S. Census Bureau, Census Regions and Divisions.
  4. U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May 2025 national median hourly wages by occupation, retrieved through the BLS Public Data API. bls.gov/oes (accessed Oct 8, 2026).

Figures with a citation number are quoted straight from the sources above. Everything else is our own math on top of them, and How we build our ranges shows how we did it. These are numbers to plan with, not quotes, so get itemized bids from local contractors before you commit.