To replace a furnace and central air conditioner together, keeping the existing ducts, our range is $6,900–$9,300, typically $8,000. A quote above about $9,300 is high for that job at U.S. average prices, and above about $11,500 it's very high, unless it includes new ductwork, a heat pump or high-efficiency equipment, zoning, or a larger home.
It's our blend of two published sources[1][2]. The calculator on this page adds a permit, a thermostat, zoning and your region.
What a normal HVAC replacement quote looks like
Most HVAC quotes are one of two jobs. A change-out swaps the furnace and outdoor unit and keeps your ducts, usually in a day. The bigger job replaces the ductwork too. Check which one your quote covers before you compare it with a range.
| Scope | Normal range | Typical | Very high above |
|---|---|---|---|
| Furnace + central AC, keep ducts A like-for-like change-out of both units, reusing the existing ductwork. | $6,900 – $9,300 | $8,000 | $11,500+ |
| Furnace + central AC with new ductwork Both units plus new supply and return ducts. | $9,300 – $15,500 | $12,700 | $19,500+ |
The normal range and typical come straight from our HVAC replacement cost guide. "Very high" means 25% above our high end, the same rule the quote checker uses. These are U.S. average prices, so adjust for your area below.
Replacing just one unit
If only the furnace or the air conditioner is being replaced, compare the quote with HomeGuide's installed prices by unit:[1]
| Unit | Installed |
|---|---|
| Central air conditioner only | $2,500 – $7,500 |
| Furnace only | $2,000 – $5,400 |
| Heat pump | $3,800 – $8,200 |
| Ductless mini-split | $3,000 – $10,000 |
What the sources say
HomeGuide puts a furnace and AC replacement at $5,000 – $11,000, averaging $8,000, and Angi puts it at $5,000 – $12,500, averaging $7,500.[1][2] With new ductwork, HomeGuide lists $7,000 – $16,000 and Angi $8,500 – $19,200.[1][2]
Example: is $12,000 too much for a new furnace and AC?
For a furnace and central AC change-out that keeps the ducts, at U.S. average prices, our range says: Very high. A $12,000 quote is 29% above the high end of our range ($9,300). If the quote includes new ductwork, it's a different story: $12,000 sits inside our $9,300–$15,500 range for that job, 6% below our typical $12,700.
Why HVAC quotes run high
- Size. A bigger house needs more cooling and heating capacity. HomeGuide puts a furnace-and-AC system at $3 to $6 per square foot of home, so a 3,000 sq ft house runs about $9,000 – $18,000.[1]
- Efficiency and system type. Higher SEER2 and AFUE ratings, heat pumps, dual-fuel systems and variable-speed equipment all cost more up front. Ask for model numbers so you can compare like for like.
- Ductwork. Leaky or undersized ducts may need sealing or replacing. HomeGuide puts ductwork alone at $2,000 – $5,000.[1]
- Add-ons. Angi puts zoning at $2,000 – $3,000 and asbestos removal in older homes at $1,200 – $3,100.[2] Our blended range for a permit is $120 – $270, and for a new thermostat $150 – $260.[1][2]
- Labor and access. HomeGuide puts installation labor at $1,000 – $3,000 of a typical job.[1] Attic installs and tight closets take longer.
- Location. Labor costs differ by region; see the table below.
What to do if your quote looks high
- Ask what's being replaced. Confirm the quote covers the furnace, the outdoor unit and the indoor coil, and whether new ducts are included. Then run it through the calculator on this page.
- Ask for model numbers and a load calculation so you know the system is sized to your house and can compare brands and efficiency ratings.
- Get two more bids on the same equipment and scope and compare them line by line. Our guide to comparing contractor bids shows how.
- Check what's included. Permit, thermostat, line set and haul-away should be listed. Angi puts removal and disposal at $60 – $500.[2]
Regional differences
See the full table
| Region (Census division) | Our cost index | Typical change-out |
|---|---|---|
| New England CT, ME, MA, NH, RI, VT | 1.04 4% above U.S. | $8,300 |
| Middle Atlantic NJ, NY, PA | 1.13 13% above U.S. | $9,000 |
| South Atlantic DE, DC, FL, GA, MD, NC, SC, VA, WV | 0.98 2% below U.S. | $7,800 |
| U.S. average | 1.00 | $8,000 |
| East North Central IL, IN, MI, OH, WI | 0.96 4% below U.S. | $7,700 |
| East South Central AL, KY, MS, TN | 0.90 10% below U.S. | $7,200 |
| West North Central IA, KS, MN, MO, NE, ND, SD | 1.02 2% above U.S. | $8,200 |
| West South Central AR, LA, OK, TX | 0.89 11% below U.S. | $7,100 |
| Mountain AZ, CO, ID, MT, NV, NM, UT, WY | 0.96 4% below U.S. | $7,700 |
| Pacific AK, CA, HI, OR, WA | 1.07 7% above U.S. | $8,600 |
How we adjust for each region
This part is our own math, not a published number. Remodeling costs more in some regions than others. To measure that, we compare each region's 2025 Cost vs. Value prices for four interior projects (three bathroom remodels and a basement remodel) with the national average, then average the four results.[3] Multiply our national typical by that number and you get the typical for each region. Here's how we build our ranges.
Costs in your city
Where you live changes the price, mostly because of labor. Our local cost pages adjust these national ranges for 50 metro areas using local construction wages, including Baltimore, Jacksonville and Providence. See all 50 cities →
HVAC quote FAQ
Is $12,000 too much for a furnace and AC replacement?
For a change-out that keeps the ducts, it's above our $6,900–$9,300 range at U.S. average prices. It's inside our $9,300–$15,500 range if the job includes new ductwork, and it can be fair for a heat pump, high-efficiency equipment or a large home.
How much should a new furnace and AC cost?
Typically about $8,000 for a change-out that keeps the ducts, and about $12,700 with new ductwork, by our blended ranges.[1][2]
Why are HVAC quotes so different?
Bids often price different equipment: brand, size, efficiency rating and warranty. Ask each contractor for the model numbers, a load calculation and what's included, then compare like for like.
Should I replace the furnace and AC at the same time?
Often, yes. Matched equipment runs more efficiently and you pay for one installation. If one unit is fairly new, replacing only the failed one can make sense.
How many HVAC quotes should I get?
At least three, for the same equipment size and efficiency. A bid far below the others often leaves out the permit, the coil or haul-away.
Get the free Remodel Budget Starter, plus new cost guides once a month
It's a one-page budget spreadsheet for any project, with room for your scope, line items, contingency and total.
Related cost guides
Sources
- HomeGuide, “How much does a new HVAC system cost to install or replace?” (updated Aug 27, 2025). homeguide.com/costs/hvac-cost (accessed Oct 13, 2026).
- Angi, “How Much Does HVAC Replacement Cost? [2026 Data]” (updated Aug 3, 2026). angi.com/articles/insider-s-price-guide-new-heating-and-cooling-system.htm (accessed Oct 13, 2026).
- Zonda / Journal of Light Construction, 2025 Cost vs. Value Report: national averages and regional pages (New England, Middle Atlantic, South Atlantic, East North Central, East South Central, West North Central, West South Central, Mountain, Pacific) (accessed Oct 8, 2026). © 2025 Zonda Media. We quote a few national figures and use the regional figures only to derive our own cost index. States per division from the U.S. Census Bureau, Census Regions and Divisions.
Figures with a citation number are quoted straight from the sources above. Everything else is our own math on top of them, and How we build our ranges shows how we did it. These are numbers to plan with, not quotes, so get itemized bids from local contractors before you commit.
