That's HomeGuide's range to upgrade a home to a 200-amp electrical panel: $1,300 – $1,600 to upgrade from 100 amps, or $1,800 – $2,500 when a new 200-amp service panel is needed.[1] HomeGuide's national average for replacing a breaker box is $1,475, with most homeowners paying $1,287 – $1,707.[1] Our planning budget for a typical 100-to-200-amp upgrade with a new meter box and a few AFCI breakers is about $2,700.
Ranges quoted from HomeGuide [1]; the planning budget is our own math, worked out from those figures. Use this to plan; your bids will set the real price. Amperage, the meter and service entrance, and what's found behind an old panel move the price most.
Panel upgrade cost by amperage
An upgrade raises the capacity of your service, usually from 60 or 100 amps to 200. A replacement swaps an old or unsafe panel for a new one of the same size. Both are priced installed, with the panel, breakers, labor and materials.
| Upgrade | Installed cost |
|---|---|
| 60 to 100 amps | $850 – $1,100 |
| 100 to 200 amps | $1,300 – $1,600 |
| 200 to 400 amps | $2,000 – $4,000 |
HomeGuide's upgrade costs by amperage.[1] HomeGuide puts a typical replacement at 8 to 10 hours of electrician time.
New service panel cost
When the existing service panel can't be reused, the electrician installs a new service panel. HomeGuide prices that separately:
| New panel | Installed cost |
|---|---|
| 100-amp service panel | $1,200 – $1,600 |
| 200-amp service panel | $1,800 – $2,500 |
| 400-amp service panel | $2,000 – $4,000 |
HomeGuide.[1] The panel box itself is a small part of the bill: HomeGuide puts a retail 200-amp panel at $75 – $870, with most of the cost in labor.[1]
Related electrical costs
See the full table
| Item | Cost |
|---|---|
| Replace a fuse box with a breaker panel | $1,100 – $4,000 |
| Sub-panel (garage, basement or addition) | $500 – $1,000 |
| Move the panel | $1,000 – $4,000 |
| Replace the meter box | $200 – $500 |
| New meter from the power company, when required | $200 – $500 |
| Replace one circuit breaker | $150 – $200 |
| Install an AFCI or GFCI breaker | $130 – $180 each |
| Electrician labor | $40 – $100 per hour |
All figures from HomeGuide.[1] Opening drywall around the panel, bringing old wiring up to code and the permit are usually extra; ask for each as its own line.
Planning budget: 100 to 200 amps
Here's how we'd build a planning budget for a common job: a 1970s house going from 100 to 200 amps, with a new meter box and four AFCI breakers for bedrooms and living areas. It's the checklist we'd hold every bid against.
| Line item | How we priced it | Amount |
|---|---|---|
| Panel upgrade, 100 to 200 amps | Midpoint of HomeGuide's $1,300 – $1,600 | $1,450 |
| Meter box replacement | Midpoint of HomeGuide's $200 – $500 | $350 |
| Four AFCI breakers, installed | 4 × midpoint of HomeGuide's $130 – $180 | $620 |
| Contingency, 10% | Our own allowance for older wiring behind the panel | $240 |
| Planning total | Before the permit and regional adjustment | $2,660 |
We did this math ourselves, using HomeGuide's figures.[1] If the utility requires a new service entrance or a new 200-amp service panel, swap in HomeGuide's $1,800 – $2,500 for the first line. Curious about the math? See how we build our ranges.
When to upgrade or replace the panel
- Adding big loads: an EV charger, a heat pump or new HVAC, an electric range, or a home addition or ADU.
- A fuse box, or a Federal Pacific or Zinsco panel, which HomeGuide says should be replaced.[1]
- Warning signs: breakers that trip often, a warm or buzzing panel, flickering lights, or scorch marks at outlets.
- A big remodel: a kitchen remodel or gut renovation often needs new circuits, so price the panel at the same time.
HomeGuide is clear that panel work should be permitted and done by a licensed electrician.[1]
Costs in your city
Where you live changes the price, mostly because of labor. Our local cost pages adjust these national ranges for 50 metro areas using local construction wages, including Cincinnati, Miami and Salt Lake City. See all 50 cities →
Electrical panel upgrade FAQ
How much does it cost to upgrade an electrical panel to 200 amps?
HomeGuide puts a 100-to-200-amp upgrade at $1,300 – $1,600, or $1,800 – $2,500 if a new 200-amp service panel is needed.[1]
How much does it cost to replace a breaker box?
HomeGuide's national average is $1,475, with most homeowners paying $1,287 – $1,707, and a range of $851 – $4,000.[1]
How much does it cost to replace a fuse box with breakers?
HomeGuide puts it at $1,100 – $4,000, depending on the capacity of the new breaker panel.[1]
How long does an electrical panel upgrade take?
HomeGuide puts a typical panel replacement at 8 to 10 hours of work.[1] The power is off for most of that time, and the utility may need to schedule its part of the job.
Do I need a permit to upgrade my electrical panel?
Yes. HomeGuide advises never doing a panel upgrade without a permit, and some areas require a licensed electrician for the work.[1]
Get the free Remodel Budget Starter, plus new cost guides once a month
It's a one-page budget spreadsheet for any project, with room for your scope, line items, contingency and total.
Related cost guides
Sources
- HomeGuide, “How much does it cost to upgrade or replace an electrical panel?” (updated Dec 30, 2024). homeguide.com/costs/cost-to-replace-electrical-panel (accessed Nov 10, 2026).
Figures with a citation number are quoted straight from the sources above. Everything else is our own math on top of them, and How we build our ranges shows how we did it. These are numbers to plan with, not quotes, so get itemized bids from local contractors before you commit.